8/23/2023 0 Comments Motorola cps software program![]() ![]() The first thing you need to do is install Dosbox. If you want to install it yourself use this guide. The abandon ware scene offers premade Windows 3.1 packs you can right drop into your Dosbox path. This is easy just google for it, but watch out for malware! A copy of the Motorola RSS programming software for the GM950.Required changesĪfter clearing the cable situation, let’s setup the software. ![]() Click ok – and you are done with the cable config. Make sure to adjust the Dosbox config below as well if you use a different port.Īlso make sure that the FIFO buffer is off. If COM1 is in use at the moment use another COM port. Locate the COM & LPT entry and double click on the device.įirst change the COM Port Number to COM1. Go to the Windows Controlpanel -> System -> Device Manager. Once you have obtained the cable, plug it in and make a few changes to the device. If you are looking for one, try it via Amazon, AliExpress or eBay. It never worked for the GM300, but it works like a charm on the GM950. I originally bought it for my GM300 devices. I got lucky and found a MaxtonData (RPC-MM-U) USB cable in one of my boxes. The most important lines BUS+ and GND are the same. Not sure about this but if you want to build a cable on your own it might be interesting to look into this. I assume they are some sort of HI / power pins which you can see in a bunch of other Motorola / FTDI based schematics. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |